ManuThe baler machine works very well.
AnkitYour baler is very good and works well.Scrap metal bales are great.
Horizontal Hydraulic Waste Steel Scraps Metal Chip Briquetting Machine
|Name||Metal Scrap Briquetting Machine||Drive||Hydraulic Drive|
|Scrap Material||Various Waste Metal Scraps||Hydraulic System Pressure||≤25MPa|
|Block Size Diameter||φ280 Mm||Productivity||2.5-3.5 Blocks/min|
|Power Specifications||380V/3P 50Hz||Control System||PLC+Remote|
|Cooling System||New Air Cooling||Color||Blue & Red & White（customized）|
This is a Y83SW series 1000-ton double-main-cylinder horizontal metal briquetting machine, which can process 14-19 tons of crushed material or iron filings per hour. The cake has a high compactness and is a cylinder with a diameter of 300mm. for easy storage. Reduce transportation and smelting losses during transportation and recycling. This metal briquetting machine uses a servo motor, which is energy-saving and efficient. It is also equipped with an automatic feeding device. The operation mode is manual and remote control. The machine occupies an area of about 17.5 meters long and 5.5 meters wide.
|NO.||Parameter name and content||Remark|
|1||Main Pressure Cylinder||Model||YG600/530||Qty.||1pc||780 Ton|
|2||Fast Cylinder||Model||YG320||Qty.||1pc||220 Ton|
|3||Secondary Pressure Cylinder||Model||YG600/590||Qty.||1pc||780 Ton|
|4||Fast Cylinder||Model||YG320||Qty.||1pc||220 Ton|
|5||Pressure Cylinder||Model||YG180/120||Qty.||2pc||140 Ton|
|6||Pushing Cylinder||Model||YG125/80||Qty.||1pc||30 Ton|
|3||Hydraulic System Working Pressure||<25MPa|
|5||Block Density (Steel)||≤4200kg/m³|
The parameters in the above table are for reference only.
1. The electrical part adopts imported PLC automatic control system, which has strong anti-interference ability and low failure rate.
2. The body adopts the overall steel structure, which has high strength and good stability, and does not need to install anchor screws.
3. The machine adopts hydraulic transmission, highly professional integral valve block, and large flow diameter, which reduces the pressure loss of the system and eliminates the drawback of leakage.
4. The use of cartridge valve, electro-hydraulic proportional valve and unique oil circuit design make the hydraulic system perfect, even if it works under long-term heavy load, the system will not be powerless.
This Y83 double master cylinder briquetting machine can press various granular and powdered cast iron, aluminum, copper, magnesium, titanium and molybdenum into high-density briquettes without adding any additives, which can be directly put into the furnace for smelting, greatly Reduced costs.
Jiangsu Dalongkai Technology Co., Ltd. has been a trusted name in the waste recycling equipment industry for over a decade as a dedicated Chinese manufacturer of scrap metal recycling equipment, our flagship products includethe shear baler, scrap baler, scrap shear, and recycling crane.
In addition to scrap metal processing equipment, we also supply horizontal baler and vertical baler for compacting plastic, paper, cardboard, straw, textile and more types of wastes.
Our Dalongkai brand has received critical acclaim both domestically and overseas. As a trusted waste recycling equipment manufacturer, we have successfully passed the certification of both the TUV and the ISO9001 Quality Management System. We are currently in the process of obtaining the approval of European standards such as CE and UL.
Q1: How can i get the after-service?
A: We provide one year guarantee and lifelong maintenance.
We will send you the spare parts by free if the problems caused by us.
If it is the men-made problems,we also send the spare parts,however it is charged.
Any problem, you can call us directly.
Q2: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Our factory address: 29# Panlongshan Road,Jiangyin city,Jiangsu province,214429, P.R China
Our factory is near Shanghai Pudong Airport.We can pick you up in the airport.
Hotel booking service is available .
Q3:Are you a factory or trade company?
A: We are manufacturer with own factory for 20 years, export proportion 50~60%.
Q4:How can I trust your company?
A: With 20-years-professional design, we can provide you suitable suggestion and lowest price
1. Assessed by third party, national patents and CE, ISO for all equipment.
2. Welcome to inspect anytime. We are near to Shanghai Pudong airport.
3. For our machine, we do very well on hydraulic balers,hydraulic shears.
Q5 :Is your price competitive?
A: Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.